86-023-86850812
C1801, Shidai Mingju, Houqi Hegou, Jiangbei Dist., Chongqing, China (Mainland)
Introduction
The JK-M15-5 and JK-M15-6 are bulb-type level regulator for level regulation and control of pumps and valves.
The casing of the regulator is made of polypropylene and the cable is sheathed with a special PVC compound.
The level regulator contains a micro switch, rated 380VAC/16A.
Important! In many cases, local codes require that the regulator be connected to a low-voltage supply, even it is approved for a higher voltage.
FLYGT recommends that the regulator be connected to a low-voltage supply, 48 or 24 V, and a protective transformer.
Special rules apply to installation in an explosive atmosphere. Intrinsically safe circuit are normally required.
The JK-M15-5 and JK-M1-6 are available in different versions for the guarantee does not cover faults caused by deficient maintenance, improper installation, incorrectly executed repair work or normal wear and tear.
FLYGT assumes no liability for either bodily injuries, material damages or economic losses.
Specification:
Rated Voltage: 250V(380V)/120V
Rated Current: 16A(8A)/10A(8A)/10A(4A)
Working Temperture: 0°CMechinacal Endurance: ≥100.000times
Electrical Endurance: ≥50.000times
Protection Grade: IP68CS
Features:
Microswitch: 10(8)A 250V~10(4)A 380V
Switch currency: +++ ≥50 000switch workings tested by VDE specialisation
Protective connection: T 70U
Protection: waterproof
Max.temperature: 70°C
Working pressure: max.1bar
Circuitbreaking capacity: Directly KW with 250V
Standard Cable Length: 5m ~ 100mm or Accorrding to customer’s request
Float: Polypropylene
Cable:polypropylene Jacket
Counter Weight: Polypropylene Sealed Housing
Cable Material: HO7RN- F3x0.75mm2 , PVC (3x0. 5mm2,3x0.75mm2, 3x1.0mm2
In many cases, local codes require that the regulator be connected to a low-voltage supply, even it is approved for a higher voltage.
We recommends that the regulator be connected to a low-voltage supply, 48 or 24 V, and a protective transformer. Special rules apply to installation in an explosive atmosphere. Intrinsically safe circuit are normally required. The JK-M15-5 and JK-M16 are available in different versions for the guarantee does not cover faults caused by deficient maintenance, improper installation, incorrectly executed repair work or normal wear and tear.
